Pneumatic disc pump

Pneumatic disc pump

The design feature of the pneumatic disc pump is that it adopts direct drive without any seal, including mechanical seal, packing seal or electromagnetic seal, thus solving all leakage problems.Moreover, the transmission mechanism is protected by an anticorrosive elastic plastic sleeve, which is tasteless and odorless, and meets the requirements of food-grade applications.Because the pump disc moves slowly and softly, it is safe for those shear-sensitive meterial.Working principle: The disc pump is mainly used for applications with large capacity, high efficiency and low shear force.The core component of the disc pump consists of a fixed plate and a turntable mounted on an eccentric shaft.When the eccentric shaft rotates, the turntable and the fixed plate form a pump cavity, and the space at the inlet increases, which will push the liquid into the pump cavity: when the liquid is transferred to the outlet, the pump cavity space is reduced, squeezing the fluid into the outlet pipe . The liquid can be transported by the pump by repeating this cycle.

u Model: CAN-P-SLS3

u Flow rate: 0.051L/r

u Speed: 50-900rpm

u Suction range: 7m

u Head: 10m

u Caliber: DN38

u Working pressure: 3-7Bar

u Air consumption: 500L/min